{
  "title": "Embroidery field-size boundary benchmark",
  "version": "1.0.0",
  "reviewed": "2026-09-20",
  "url": "https://sewingverdicts.com/research/embroidery-field-size-benchmark/",
  "dataType": "Deterministic geometric scenarios; not empirical stitch tests",
  "selection": "12 deliberately selected boundary rectangles × 2 documented example field profiles × 2 illustrative allowances × 2 rotation settings = 96 scenarios. Not a random or representative design sample; do not report a market error rate.",
  "assumptions": {
    "allowancesMm": [
      0,
      2
    ],
    "allowanceScope": "Each of four edges. Sensitivity examples, not a manufacturer recommendation.",
    "rotation": "0 degrees only, or 0 and 90 degrees. No arbitrary-angle search.",
    "conversion": "1 inch = exactly 25.4 mm; compare before rounding. A 1e-9 mm numerical tolerance handles floating point, not physical clearance.",
    "boundary": "Equality is a geometric pass only. Actual machine acceptance and operating requirements control."
  },
  "limits": [
    "No stitch-file parsing, stitch-out, physical hoop test, machine trial or brand-wide inference.",
    "No guarantee of file-format acceptance, carriage clearance, placement, density or stitch quality.",
    "No scaling recommendation or multiposition splitting method.",
    "Fitting a design rectangle does not establish that a hoop mounts to a machine.",
    "The two profiles reference SE700 and SE2000 documentation; consult exact current model and frame documentation before use."
  ],
  "dataDictionary": {
    "quarterTurnAllowed": "Boolean; permit a second width/height check swapped through 90 degrees.",
    "documentedFieldFits": "Boolean geometric result against the documented metric rectangle minus the allowance on both sides.",
    "literalNominalFits": "Boolean result after incorrectly treating the nominal inch label as an exact field rectangle.",
    "documentedOrientation": "0, 90, or null when neither permitted orientation fits.",
    "comparison": "Agreement or direction of disagreement between the two rectangle calculations; not measured equipment performance.",
    "allowancePerSideMm": "Hypothetical allowance independently subtracted from every edge.",
    "sourceUrl": "Primary manufacturer evidence for the documented example profile. Other methods sources are in sources."
  },
  "profiles": [
    {
      "id": "field100",
      "label": "100 × 100 mm",
      "nominalLabel": "4 × 4 in",
      "widthMm": 100,
      "heightMm": 100,
      "nominalWidthIn": 4,
      "nominalHeightIn": 4,
      "exampleModel": "Brother SE700",
      "sourceId": "se700"
    },
    {
      "id": "field130",
      "label": "130 × 180 mm",
      "nominalLabel": "5 × 7 in",
      "widthMm": 130,
      "heightMm": 180,
      "nominalWidthIn": 5,
      "nominalHeightIn": 7,
      "exampleModel": "Brother SE2000",
      "sourceId": "se2000"
    }
  ],
  "designs": [
    {
      "id": "d01",
      "label": "3.90 × 3.90 in",
      "width": 3.9,
      "height": 3.9,
      "unit": "in",
      "reason": "Near the 100 mm boundary; allowance sensitivity."
    },
    {
      "id": "d02",
      "label": "100 × 100 mm",
      "width": 100,
      "height": 100,
      "unit": "mm",
      "reason": "Exact documented small-field boundary."
    },
    {
      "id": "d03",
      "label": "4.00 × 4.00 in",
      "width": 4,
      "height": 4,
      "unit": "in",
      "reason": "Literal nominal inches can give a false fit."
    },
    {
      "id": "d04",
      "label": "3.94 × 3.94 in",
      "width": 3.94,
      "height": 3.94,
      "unit": "in",
      "reason": "Rounded displayed inches can cross a metric boundary."
    },
    {
      "id": "d05",
      "label": "96 × 96 mm",
      "width": 96,
      "height": 96,
      "unit": "mm",
      "reason": "Exact small-field boundary with a 2 mm allowance on each side."
    },
    {
      "id": "d06",
      "label": "20 × 200 mm",
      "width": 20,
      "height": 200,
      "unit": "mm",
      "reason": "Low total area does not guarantee side-length fit."
    },
    {
      "id": "d07",
      "label": "5.00 × 7.00 in",
      "width": 5,
      "height": 7,
      "unit": "in",
      "reason": "Literal nominal rectangle is smaller than the documented larger field."
    },
    {
      "id": "d08",
      "label": "5.05 × 7.00 in",
      "width": 5.05,
      "height": 7,
      "unit": "in",
      "reason": "Literal nominal inches can reject a documented-field geometric fit."
    },
    {
      "id": "d09",
      "label": "130 × 180 mm",
      "width": 130,
      "height": 180,
      "unit": "mm",
      "reason": "Exact documented larger-field boundary."
    },
    {
      "id": "d10",
      "label": "7.00 × 5.00 in",
      "width": 7,
      "height": 5,
      "unit": "in",
      "reason": "Quarter-turn orientation changes rectangular fit."
    },
    {
      "id": "d11",
      "label": "130.1 × 180 mm",
      "width": 130.1,
      "height": 180,
      "unit": "mm",
      "reason": "A small width excess must not be rounded into a fit."
    },
    {
      "id": "d12",
      "label": "126 × 176 mm",
      "width": 126,
      "height": 176,
      "unit": "mm",
      "reason": "Exact larger-field boundary with 2 mm per-side allowance."
    }
  ],
  "sources": [
    {
      "id": "se700",
      "name": "Brother SE700: nominal label and 100 × 100 mm design field",
      "url": "https://www.brother-usa.com/p/sewing-embroidery/SE700",
      "checked": "2026-09-20",
      "note": "The product page pairs 4 × 4 inches with 100 × 100 mm in its Artspira description and 10 × 10 cm in its included frame description."
    },
    {
      "id": "se2000",
      "name": "Brother SE2000: nominal label and 130 × 180 mm design field",
      "url": "https://www.brother-usa.com/p/sewing-embroidery/SE2000",
      "checked": "2026-09-20",
      "note": "The product page pairs 5 × 7 inches with 130 × 180 mm in its Artspira description and 18 × 13 cm in the included frame description. Width/height are normalized here to 130 × 180 mm."
    },
    {
      "id": "field100",
      "name": "Brother Support: maximum embroidery area",
      "url": "https://help.brother-usa.com/app/answers/detail/a_id/59116",
      "checked": "2026-09-20",
      "note": "Support lists 3.93 × 3.93 inches for covered models including SE700 and SE725. This separately rounded inch statement is preserved as a note, not back-converted to override the metric field."
    },
    {
      "id": "multiposition",
      "name": "Brother Canada Support: larger and multiposition hoops",
      "url": "https://support.brother.ca/app/answers/detail/a_id/126341/kw/mobile/related/1",
      "checked": "2026-09-20",
      "note": "Explains why the covered machines retain their single-design embroidery area with a larger multiposition frame."
    },
    {
      "id": "units",
      "name": "NIST: SI Units — Length",
      "url": "https://www.nist.gov/pml/owm/si-units-length",
      "checked": "2026-09-20",
      "note": "The international inch is exactly equivalent to 25.4 mm."
    }
  ],
  "rows": [
    {
      "id": "field100-d01-m0-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d01",
      "designLabel": "3.90 × 3.90 in",
      "designWidth": 3.9,
      "designHeight": 3.9,
      "designUnit": "in",
      "designWidthMm": 99.06,
      "designHeightMm": 99.06,
      "selectionReason": "Near the 100 mm boundary; allowance sensitivity.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d01-m0-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d01",
      "designLabel": "3.90 × 3.90 in",
      "designWidth": 3.9,
      "designHeight": 3.9,
      "designUnit": "in",
      "designWidthMm": 99.06,
      "designHeightMm": 99.06,
      "selectionReason": "Near the 100 mm boundary; allowance sensitivity.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d01-m2-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d01",
      "designLabel": "3.90 × 3.90 in",
      "designWidth": 3.9,
      "designHeight": 3.9,
      "designUnit": "in",
      "designWidthMm": 99.06,
      "designHeightMm": 99.06,
      "selectionReason": "Near the 100 mm boundary; allowance sensitivity.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d01-m2-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d01",
      "designLabel": "3.90 × 3.90 in",
      "designWidth": 3.9,
      "designHeight": 3.9,
      "designUnit": "in",
      "designWidthMm": 99.06,
      "designHeightMm": 99.06,
      "selectionReason": "Near the 100 mm boundary; allowance sensitivity.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d02-m0-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d02",
      "designLabel": "100 × 100 mm",
      "designWidth": 100,
      "designHeight": 100,
      "designUnit": "mm",
      "designWidthMm": 100,
      "designHeightMm": 100,
      "selectionReason": "Exact documented small-field boundary.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d02-m0-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d02",
      "designLabel": "100 × 100 mm",
      "designWidth": 100,
      "designHeight": 100,
      "designUnit": "mm",
      "designWidthMm": 100,
      "designHeightMm": 100,
      "selectionReason": "Exact documented small-field boundary.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d02-m2-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d02",
      "designLabel": "100 × 100 mm",
      "designWidth": 100,
      "designHeight": 100,
      "designUnit": "mm",
      "designWidthMm": 100,
      "designHeightMm": 100,
      "selectionReason": "Exact documented small-field boundary.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d02-m2-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d02",
      "designLabel": "100 × 100 mm",
      "designWidth": 100,
      "designHeight": 100,
      "designUnit": "mm",
      "designWidthMm": 100,
      "designHeightMm": 100,
      "selectionReason": "Exact documented small-field boundary.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d03-m0-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d03",
      "designLabel": "4.00 × 4.00 in",
      "designWidth": 4,
      "designHeight": 4,
      "designUnit": "in",
      "designWidthMm": 101.6,
      "designHeightMm": 101.6,
      "selectionReason": "Literal nominal inches can give a false fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "nominal-false-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d03-m0-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d03",
      "designLabel": "4.00 × 4.00 in",
      "designWidth": 4,
      "designHeight": 4,
      "designUnit": "in",
      "designWidthMm": 101.6,
      "designHeightMm": 101.6,
      "selectionReason": "Literal nominal inches can give a false fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "nominal-false-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d03-m2-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d03",
      "designLabel": "4.00 × 4.00 in",
      "designWidth": 4,
      "designHeight": 4,
      "designUnit": "in",
      "designWidthMm": 101.6,
      "designHeightMm": 101.6,
      "selectionReason": "Literal nominal inches can give a false fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d03-m2-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d03",
      "designLabel": "4.00 × 4.00 in",
      "designWidth": 4,
      "designHeight": 4,
      "designUnit": "in",
      "designWidthMm": 101.6,
      "designHeightMm": 101.6,
      "selectionReason": "Literal nominal inches can give a false fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d04-m0-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d04",
      "designLabel": "3.94 × 3.94 in",
      "designWidth": 3.94,
      "designHeight": 3.94,
      "designUnit": "in",
      "designWidthMm": 100.076,
      "designHeightMm": 100.076,
      "selectionReason": "Rounded displayed inches can cross a metric boundary.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "nominal-false-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d04-m0-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d04",
      "designLabel": "3.94 × 3.94 in",
      "designWidth": 3.94,
      "designHeight": 3.94,
      "designUnit": "in",
      "designWidthMm": 100.076,
      "designHeightMm": 100.076,
      "selectionReason": "Rounded displayed inches can cross a metric boundary.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "nominal-false-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d04-m2-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d04",
      "designLabel": "3.94 × 3.94 in",
      "designWidth": 3.94,
      "designHeight": 3.94,
      "designUnit": "in",
      "designWidthMm": 100.076,
      "designHeightMm": 100.076,
      "selectionReason": "Rounded displayed inches can cross a metric boundary.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d04-m2-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d04",
      "designLabel": "3.94 × 3.94 in",
      "designWidth": 3.94,
      "designHeight": 3.94,
      "designUnit": "in",
      "designWidthMm": 100.076,
      "designHeightMm": 100.076,
      "selectionReason": "Rounded displayed inches can cross a metric boundary.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d05-m0-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d05",
      "designLabel": "96 × 96 mm",
      "designWidth": 96,
      "designHeight": 96,
      "designUnit": "mm",
      "designWidthMm": 96,
      "designHeightMm": 96,
      "selectionReason": "Exact small-field boundary with a 2 mm allowance on each side.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d05-m0-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d05",
      "designLabel": "96 × 96 mm",
      "designWidth": 96,
      "designHeight": 96,
      "designUnit": "mm",
      "designWidthMm": 96,
      "designHeightMm": 96,
      "selectionReason": "Exact small-field boundary with a 2 mm allowance on each side.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d05-m2-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d05",
      "designLabel": "96 × 96 mm",
      "designWidth": 96,
      "designHeight": 96,
      "designUnit": "mm",
      "designWidthMm": 96,
      "designHeightMm": 96,
      "selectionReason": "Exact small-field boundary with a 2 mm allowance on each side.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d05-m2-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d05",
      "designLabel": "96 × 96 mm",
      "designWidth": 96,
      "designHeight": 96,
      "designUnit": "mm",
      "designWidthMm": 96,
      "designHeightMm": 96,
      "selectionReason": "Exact small-field boundary with a 2 mm allowance on each side.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d06-m0-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d06",
      "designLabel": "20 × 200 mm",
      "designWidth": 20,
      "designHeight": 200,
      "designUnit": "mm",
      "designWidthMm": 20,
      "designHeightMm": 200,
      "selectionReason": "Low total area does not guarantee side-length fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d06-m0-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d06",
      "designLabel": "20 × 200 mm",
      "designWidth": 20,
      "designHeight": 200,
      "designUnit": "mm",
      "designWidthMm": 20,
      "designHeightMm": 200,
      "selectionReason": "Low total area does not guarantee side-length fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d06-m2-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d06",
      "designLabel": "20 × 200 mm",
      "designWidth": 20,
      "designHeight": 200,
      "designUnit": "mm",
      "designWidthMm": 20,
      "designHeightMm": 200,
      "selectionReason": "Low total area does not guarantee side-length fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d06-m2-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d06",
      "designLabel": "20 × 200 mm",
      "designWidth": 20,
      "designHeight": 200,
      "designUnit": "mm",
      "designWidthMm": 20,
      "designHeightMm": 200,
      "selectionReason": "Low total area does not guarantee side-length fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d07-m0-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d07",
      "designLabel": "5.00 × 7.00 in",
      "designWidth": 5,
      "designHeight": 7,
      "designUnit": "in",
      "designWidthMm": 127,
      "designHeightMm": 177.8,
      "selectionReason": "Literal nominal rectangle is smaller than the documented larger field.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d07-m0-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d07",
      "designLabel": "5.00 × 7.00 in",
      "designWidth": 5,
      "designHeight": 7,
      "designUnit": "in",
      "designWidthMm": 127,
      "designHeightMm": 177.8,
      "selectionReason": "Literal nominal rectangle is smaller than the documented larger field.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d07-m2-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d07",
      "designLabel": "5.00 × 7.00 in",
      "designWidth": 5,
      "designHeight": 7,
      "designUnit": "in",
      "designWidthMm": 127,
      "designHeightMm": 177.8,
      "selectionReason": "Literal nominal rectangle is smaller than the documented larger field.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d07-m2-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d07",
      "designLabel": "5.00 × 7.00 in",
      "designWidth": 5,
      "designHeight": 7,
      "designUnit": "in",
      "designWidthMm": 127,
      "designHeightMm": 177.8,
      "selectionReason": "Literal nominal rectangle is smaller than the documented larger field.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d08-m0-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d08",
      "designLabel": "5.05 × 7.00 in",
      "designWidth": 5.05,
      "designHeight": 7,
      "designUnit": "in",
      "designWidthMm": 128.27,
      "designHeightMm": 177.8,
      "selectionReason": "Literal nominal inches can reject a documented-field geometric fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d08-m0-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d08",
      "designLabel": "5.05 × 7.00 in",
      "designWidth": 5.05,
      "designHeight": 7,
      "designUnit": "in",
      "designWidthMm": 128.27,
      "designHeightMm": 177.8,
      "selectionReason": "Literal nominal inches can reject a documented-field geometric fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d08-m2-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d08",
      "designLabel": "5.05 × 7.00 in",
      "designWidth": 5.05,
      "designHeight": 7,
      "designUnit": "in",
      "designWidthMm": 128.27,
      "designHeightMm": 177.8,
      "selectionReason": "Literal nominal inches can reject a documented-field geometric fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d08-m2-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d08",
      "designLabel": "5.05 × 7.00 in",
      "designWidth": 5.05,
      "designHeight": 7,
      "designUnit": "in",
      "designWidthMm": 128.27,
      "designHeightMm": 177.8,
      "selectionReason": "Literal nominal inches can reject a documented-field geometric fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d09-m0-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d09",
      "designLabel": "130 × 180 mm",
      "designWidth": 130,
      "designHeight": 180,
      "designUnit": "mm",
      "designWidthMm": 130,
      "designHeightMm": 180,
      "selectionReason": "Exact documented larger-field boundary.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d09-m0-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d09",
      "designLabel": "130 × 180 mm",
      "designWidth": 130,
      "designHeight": 180,
      "designUnit": "mm",
      "designWidthMm": 130,
      "designHeightMm": 180,
      "selectionReason": "Exact documented larger-field boundary.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d09-m2-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d09",
      "designLabel": "130 × 180 mm",
      "designWidth": 130,
      "designHeight": 180,
      "designUnit": "mm",
      "designWidthMm": 130,
      "designHeightMm": 180,
      "selectionReason": "Exact documented larger-field boundary.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d09-m2-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d09",
      "designLabel": "130 × 180 mm",
      "designWidth": 130,
      "designHeight": 180,
      "designUnit": "mm",
      "designWidthMm": 130,
      "designHeightMm": 180,
      "selectionReason": "Exact documented larger-field boundary.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d10-m0-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d10",
      "designLabel": "7.00 × 5.00 in",
      "designWidth": 7,
      "designHeight": 5,
      "designUnit": "in",
      "designWidthMm": 177.8,
      "designHeightMm": 127,
      "selectionReason": "Quarter-turn orientation changes rectangular fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d10-m0-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d10",
      "designLabel": "7.00 × 5.00 in",
      "designWidth": 7,
      "designHeight": 5,
      "designUnit": "in",
      "designWidthMm": 177.8,
      "designHeightMm": 127,
      "selectionReason": "Quarter-turn orientation changes rectangular fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d10-m2-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d10",
      "designLabel": "7.00 × 5.00 in",
      "designWidth": 7,
      "designHeight": 5,
      "designUnit": "in",
      "designWidthMm": 177.8,
      "designHeightMm": 127,
      "selectionReason": "Quarter-turn orientation changes rectangular fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d10-m2-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d10",
      "designLabel": "7.00 × 5.00 in",
      "designWidth": 7,
      "designHeight": 5,
      "designUnit": "in",
      "designWidthMm": 177.8,
      "designHeightMm": 127,
      "selectionReason": "Quarter-turn orientation changes rectangular fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d11-m0-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d11",
      "designLabel": "130.1 × 180 mm",
      "designWidth": 130.1,
      "designHeight": 180,
      "designUnit": "mm",
      "designWidthMm": 130.1,
      "designHeightMm": 180,
      "selectionReason": "A small width excess must not be rounded into a fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d11-m0-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d11",
      "designLabel": "130.1 × 180 mm",
      "designWidth": 130.1,
      "designHeight": 180,
      "designUnit": "mm",
      "designWidthMm": 130.1,
      "designHeightMm": 180,
      "selectionReason": "A small width excess must not be rounded into a fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d11-m2-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d11",
      "designLabel": "130.1 × 180 mm",
      "designWidth": 130.1,
      "designHeight": 180,
      "designUnit": "mm",
      "designWidthMm": 130.1,
      "designHeightMm": 180,
      "selectionReason": "A small width excess must not be rounded into a fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d11-m2-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d11",
      "designLabel": "130.1 × 180 mm",
      "designWidth": 130.1,
      "designHeight": 180,
      "designUnit": "mm",
      "designWidthMm": 130.1,
      "designHeightMm": 180,
      "selectionReason": "A small width excess must not be rounded into a fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d12-m0-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d12",
      "designLabel": "126 × 176 mm",
      "designWidth": 126,
      "designHeight": 176,
      "designUnit": "mm",
      "designWidthMm": 126,
      "designHeightMm": 176,
      "selectionReason": "Exact larger-field boundary with 2 mm per-side allowance.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d12-m0-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d12",
      "designLabel": "126 × 176 mm",
      "designWidth": 126,
      "designHeight": 176,
      "designUnit": "mm",
      "designWidthMm": 126,
      "designHeightMm": 176,
      "selectionReason": "Exact larger-field boundary with 2 mm per-side allowance.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 100,
      "usableHeightMm": 100,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d12-m2-r0",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d12",
      "designLabel": "126 × 176 mm",
      "designWidth": 126,
      "designHeight": 176,
      "designUnit": "mm",
      "designWidthMm": 126,
      "designHeightMm": 176,
      "selectionReason": "Exact larger-field boundary with 2 mm per-side allowance.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field100-d12-m2-r90",
      "profileId": "field100",
      "exampleModel": "Brother SE700",
      "nominalLabel": "4 × 4 in",
      "fieldWidthMm": 100,
      "fieldHeightMm": 100,
      "nominalConvertedWidthMm": 101.6,
      "nominalConvertedHeightMm": 101.6,
      "designId": "d12",
      "designLabel": "126 × 176 mm",
      "designWidth": 126,
      "designHeight": 176,
      "designUnit": "mm",
      "designWidthMm": 126,
      "designHeightMm": 176,
      "selectionReason": "Exact larger-field boundary with 2 mm per-side allowance.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 96,
      "usableHeightMm": 96,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE700"
    },
    {
      "id": "field130-d01-m0-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d01",
      "designLabel": "3.90 × 3.90 in",
      "designWidth": 3.9,
      "designHeight": 3.9,
      "designUnit": "in",
      "designWidthMm": 99.06,
      "designHeightMm": 99.06,
      "selectionReason": "Near the 100 mm boundary; allowance sensitivity.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d01-m0-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d01",
      "designLabel": "3.90 × 3.90 in",
      "designWidth": 3.9,
      "designHeight": 3.9,
      "designUnit": "in",
      "designWidthMm": 99.06,
      "designHeightMm": 99.06,
      "selectionReason": "Near the 100 mm boundary; allowance sensitivity.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d01-m2-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d01",
      "designLabel": "3.90 × 3.90 in",
      "designWidth": 3.9,
      "designHeight": 3.9,
      "designUnit": "in",
      "designWidthMm": 99.06,
      "designHeightMm": 99.06,
      "selectionReason": "Near the 100 mm boundary; allowance sensitivity.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d01-m2-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d01",
      "designLabel": "3.90 × 3.90 in",
      "designWidth": 3.9,
      "designHeight": 3.9,
      "designUnit": "in",
      "designWidthMm": 99.06,
      "designHeightMm": 99.06,
      "selectionReason": "Near the 100 mm boundary; allowance sensitivity.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d02-m0-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d02",
      "designLabel": "100 × 100 mm",
      "designWidth": 100,
      "designHeight": 100,
      "designUnit": "mm",
      "designWidthMm": 100,
      "designHeightMm": 100,
      "selectionReason": "Exact documented small-field boundary.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d02-m0-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d02",
      "designLabel": "100 × 100 mm",
      "designWidth": 100,
      "designHeight": 100,
      "designUnit": "mm",
      "designWidthMm": 100,
      "designHeightMm": 100,
      "selectionReason": "Exact documented small-field boundary.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d02-m2-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d02",
      "designLabel": "100 × 100 mm",
      "designWidth": 100,
      "designHeight": 100,
      "designUnit": "mm",
      "designWidthMm": 100,
      "designHeightMm": 100,
      "selectionReason": "Exact documented small-field boundary.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d02-m2-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d02",
      "designLabel": "100 × 100 mm",
      "designWidth": 100,
      "designHeight": 100,
      "designUnit": "mm",
      "designWidthMm": 100,
      "designHeightMm": 100,
      "selectionReason": "Exact documented small-field boundary.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d03-m0-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d03",
      "designLabel": "4.00 × 4.00 in",
      "designWidth": 4,
      "designHeight": 4,
      "designUnit": "in",
      "designWidthMm": 101.6,
      "designHeightMm": 101.6,
      "selectionReason": "Literal nominal inches can give a false fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d03-m0-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d03",
      "designLabel": "4.00 × 4.00 in",
      "designWidth": 4,
      "designHeight": 4,
      "designUnit": "in",
      "designWidthMm": 101.6,
      "designHeightMm": 101.6,
      "selectionReason": "Literal nominal inches can give a false fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d03-m2-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d03",
      "designLabel": "4.00 × 4.00 in",
      "designWidth": 4,
      "designHeight": 4,
      "designUnit": "in",
      "designWidthMm": 101.6,
      "designHeightMm": 101.6,
      "selectionReason": "Literal nominal inches can give a false fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d03-m2-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d03",
      "designLabel": "4.00 × 4.00 in",
      "designWidth": 4,
      "designHeight": 4,
      "designUnit": "in",
      "designWidthMm": 101.6,
      "designHeightMm": 101.6,
      "selectionReason": "Literal nominal inches can give a false fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d04-m0-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d04",
      "designLabel": "3.94 × 3.94 in",
      "designWidth": 3.94,
      "designHeight": 3.94,
      "designUnit": "in",
      "designWidthMm": 100.076,
      "designHeightMm": 100.076,
      "selectionReason": "Rounded displayed inches can cross a metric boundary.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d04-m0-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d04",
      "designLabel": "3.94 × 3.94 in",
      "designWidth": 3.94,
      "designHeight": 3.94,
      "designUnit": "in",
      "designWidthMm": 100.076,
      "designHeightMm": 100.076,
      "selectionReason": "Rounded displayed inches can cross a metric boundary.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d04-m2-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d04",
      "designLabel": "3.94 × 3.94 in",
      "designWidth": 3.94,
      "designHeight": 3.94,
      "designUnit": "in",
      "designWidthMm": 100.076,
      "designHeightMm": 100.076,
      "selectionReason": "Rounded displayed inches can cross a metric boundary.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d04-m2-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d04",
      "designLabel": "3.94 × 3.94 in",
      "designWidth": 3.94,
      "designHeight": 3.94,
      "designUnit": "in",
      "designWidthMm": 100.076,
      "designHeightMm": 100.076,
      "selectionReason": "Rounded displayed inches can cross a metric boundary.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d05-m0-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d05",
      "designLabel": "96 × 96 mm",
      "designWidth": 96,
      "designHeight": 96,
      "designUnit": "mm",
      "designWidthMm": 96,
      "designHeightMm": 96,
      "selectionReason": "Exact small-field boundary with a 2 mm allowance on each side.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d05-m0-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d05",
      "designLabel": "96 × 96 mm",
      "designWidth": 96,
      "designHeight": 96,
      "designUnit": "mm",
      "designWidthMm": 96,
      "designHeightMm": 96,
      "selectionReason": "Exact small-field boundary with a 2 mm allowance on each side.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d05-m2-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d05",
      "designLabel": "96 × 96 mm",
      "designWidth": 96,
      "designHeight": 96,
      "designUnit": "mm",
      "designWidthMm": 96,
      "designHeightMm": 96,
      "selectionReason": "Exact small-field boundary with a 2 mm allowance on each side.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d05-m2-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d05",
      "designLabel": "96 × 96 mm",
      "designWidth": 96,
      "designHeight": 96,
      "designUnit": "mm",
      "designWidthMm": 96,
      "designHeightMm": 96,
      "selectionReason": "Exact small-field boundary with a 2 mm allowance on each side.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d06-m0-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d06",
      "designLabel": "20 × 200 mm",
      "designWidth": 20,
      "designHeight": 200,
      "designUnit": "mm",
      "designWidthMm": 20,
      "designHeightMm": 200,
      "selectionReason": "Low total area does not guarantee side-length fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d06-m0-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d06",
      "designLabel": "20 × 200 mm",
      "designWidth": 20,
      "designHeight": 200,
      "designUnit": "mm",
      "designWidthMm": 20,
      "designHeightMm": 200,
      "selectionReason": "Low total area does not guarantee side-length fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d06-m2-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d06",
      "designLabel": "20 × 200 mm",
      "designWidth": 20,
      "designHeight": 200,
      "designUnit": "mm",
      "designWidthMm": 20,
      "designHeightMm": 200,
      "selectionReason": "Low total area does not guarantee side-length fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d06-m2-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d06",
      "designLabel": "20 × 200 mm",
      "designWidth": 20,
      "designHeight": 200,
      "designUnit": "mm",
      "designWidthMm": 20,
      "designHeightMm": 200,
      "selectionReason": "Low total area does not guarantee side-length fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d07-m0-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d07",
      "designLabel": "5.00 × 7.00 in",
      "designWidth": 5,
      "designHeight": 7,
      "designUnit": "in",
      "designWidthMm": 127,
      "designHeightMm": 177.8,
      "selectionReason": "Literal nominal rectangle is smaller than the documented larger field.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d07-m0-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d07",
      "designLabel": "5.00 × 7.00 in",
      "designWidth": 5,
      "designHeight": 7,
      "designUnit": "in",
      "designWidthMm": 127,
      "designHeightMm": 177.8,
      "selectionReason": "Literal nominal rectangle is smaller than the documented larger field.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d07-m2-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d07",
      "designLabel": "5.00 × 7.00 in",
      "designWidth": 5,
      "designHeight": 7,
      "designUnit": "in",
      "designWidthMm": 127,
      "designHeightMm": 177.8,
      "selectionReason": "Literal nominal rectangle is smaller than the documented larger field.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d07-m2-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d07",
      "designLabel": "5.00 × 7.00 in",
      "designWidth": 5,
      "designHeight": 7,
      "designUnit": "in",
      "designWidthMm": 127,
      "designHeightMm": 177.8,
      "selectionReason": "Literal nominal rectangle is smaller than the documented larger field.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d08-m0-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d08",
      "designLabel": "5.05 × 7.00 in",
      "designWidth": 5.05,
      "designHeight": 7,
      "designUnit": "in",
      "designWidthMm": 128.27,
      "designHeightMm": 177.8,
      "selectionReason": "Literal nominal inches can reject a documented-field geometric fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "nominal-false-rejection",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d08-m0-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d08",
      "designLabel": "5.05 × 7.00 in",
      "designWidth": 5.05,
      "designHeight": 7,
      "designUnit": "in",
      "designWidthMm": 128.27,
      "designHeightMm": 177.8,
      "selectionReason": "Literal nominal inches can reject a documented-field geometric fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "nominal-false-rejection",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d08-m2-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d08",
      "designLabel": "5.05 × 7.00 in",
      "designWidth": 5.05,
      "designHeight": 7,
      "designUnit": "in",
      "designWidthMm": 128.27,
      "designHeightMm": 177.8,
      "selectionReason": "Literal nominal inches can reject a documented-field geometric fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d08-m2-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d08",
      "designLabel": "5.05 × 7.00 in",
      "designWidth": 5.05,
      "designHeight": 7,
      "designUnit": "in",
      "designWidthMm": 128.27,
      "designHeightMm": 177.8,
      "selectionReason": "Literal nominal inches can reject a documented-field geometric fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d09-m0-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d09",
      "designLabel": "130 × 180 mm",
      "designWidth": 130,
      "designHeight": 180,
      "designUnit": "mm",
      "designWidthMm": 130,
      "designHeightMm": 180,
      "selectionReason": "Exact documented larger-field boundary.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "nominal-false-rejection",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d09-m0-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d09",
      "designLabel": "130 × 180 mm",
      "designWidth": 130,
      "designHeight": 180,
      "designUnit": "mm",
      "designWidthMm": 130,
      "designHeightMm": 180,
      "selectionReason": "Exact documented larger-field boundary.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "nominal-false-rejection",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d09-m2-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d09",
      "designLabel": "130 × 180 mm",
      "designWidth": 130,
      "designHeight": 180,
      "designUnit": "mm",
      "designWidthMm": 130,
      "designHeightMm": 180,
      "selectionReason": "Exact documented larger-field boundary.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d09-m2-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d09",
      "designLabel": "130 × 180 mm",
      "designWidth": 130,
      "designHeight": 180,
      "designUnit": "mm",
      "designWidthMm": 130,
      "designHeightMm": 180,
      "selectionReason": "Exact documented larger-field boundary.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d10-m0-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d10",
      "designLabel": "7.00 × 5.00 in",
      "designWidth": 7,
      "designHeight": 5,
      "designUnit": "in",
      "designWidthMm": 177.8,
      "designHeightMm": 127,
      "selectionReason": "Quarter-turn orientation changes rectangular fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d10-m0-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d10",
      "designLabel": "7.00 × 5.00 in",
      "designWidth": 7,
      "designHeight": 5,
      "designUnit": "in",
      "designWidthMm": 177.8,
      "designHeightMm": 127,
      "selectionReason": "Quarter-turn orientation changes rectangular fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 90,
      "literalNominalFits": true,
      "literalNominalOrientation": 90,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d10-m2-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d10",
      "designLabel": "7.00 × 5.00 in",
      "designWidth": 7,
      "designHeight": 5,
      "designUnit": "in",
      "designWidthMm": 177.8,
      "designHeightMm": 127,
      "selectionReason": "Quarter-turn orientation changes rectangular fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d10-m2-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d10",
      "designLabel": "7.00 × 5.00 in",
      "designWidth": 7,
      "designHeight": 5,
      "designUnit": "in",
      "designWidthMm": 177.8,
      "designHeightMm": 127,
      "selectionReason": "Quarter-turn orientation changes rectangular fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d11-m0-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d11",
      "designLabel": "130.1 × 180 mm",
      "designWidth": 130.1,
      "designHeight": 180,
      "designUnit": "mm",
      "designWidthMm": 130.1,
      "designHeightMm": 180,
      "selectionReason": "A small width excess must not be rounded into a fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d11-m0-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d11",
      "designLabel": "130.1 × 180 mm",
      "designWidth": 130.1,
      "designHeight": 180,
      "designUnit": "mm",
      "designWidthMm": 130.1,
      "designHeightMm": 180,
      "selectionReason": "A small width excess must not be rounded into a fit.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d11-m2-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d11",
      "designLabel": "130.1 × 180 mm",
      "designWidth": 130.1,
      "designHeight": 180,
      "designUnit": "mm",
      "designWidthMm": 130.1,
      "designHeightMm": 180,
      "selectionReason": "A small width excess must not be rounded into a fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d11-m2-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d11",
      "designLabel": "130.1 × 180 mm",
      "designWidth": 130.1,
      "designHeight": 180,
      "designUnit": "mm",
      "designWidthMm": 130.1,
      "designHeightMm": 180,
      "selectionReason": "A small width excess must not be rounded into a fit.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": false,
      "documentedOrientation": null,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "both-no-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d12-m0-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d12",
      "designLabel": "126 × 176 mm",
      "designWidth": 126,
      "designHeight": 176,
      "designUnit": "mm",
      "designWidthMm": 126,
      "designHeightMm": 176,
      "selectionReason": "Exact larger-field boundary with 2 mm per-side allowance.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": false,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d12-m0-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d12",
      "designLabel": "126 × 176 mm",
      "designWidth": 126,
      "designHeight": 176,
      "designUnit": "mm",
      "designWidthMm": 126,
      "designHeightMm": 176,
      "selectionReason": "Exact larger-field boundary with 2 mm per-side allowance.",
      "allowancePerSideMm": 0,
      "quarterTurnAllowed": true,
      "usableWidthMm": 130,
      "usableHeightMm": 180,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": true,
      "literalNominalOrientation": 0,
      "comparison": "both-fit",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d12-m2-r0",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d12",
      "designLabel": "126 × 176 mm",
      "designWidth": 126,
      "designHeight": 176,
      "designUnit": "mm",
      "designWidthMm": 126,
      "designHeightMm": 176,
      "selectionReason": "Exact larger-field boundary with 2 mm per-side allowance.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": false,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "nominal-false-rejection",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    },
    {
      "id": "field130-d12-m2-r90",
      "profileId": "field130",
      "exampleModel": "Brother SE2000",
      "nominalLabel": "5 × 7 in",
      "fieldWidthMm": 130,
      "fieldHeightMm": 180,
      "nominalConvertedWidthMm": 127,
      "nominalConvertedHeightMm": 177.8,
      "designId": "d12",
      "designLabel": "126 × 176 mm",
      "designWidth": 126,
      "designHeight": 176,
      "designUnit": "mm",
      "designWidthMm": 126,
      "designHeightMm": 176,
      "selectionReason": "Exact larger-field boundary with 2 mm per-side allowance.",
      "allowancePerSideMm": 2,
      "quarterTurnAllowed": true,
      "usableWidthMm": 126,
      "usableHeightMm": 176,
      "documentedFieldFits": true,
      "documentedOrientation": 0,
      "literalNominalFits": false,
      "literalNominalOrientation": null,
      "comparison": "nominal-false-rejection",
      "sourceUrl": "https://www.brother-usa.com/p/sewing-embroidery/SE2000"
    }
  ]
}